Accessibility Page Navigation
Style sheets must be enabled to view this page as it was intended.
Print Header
product details frame
product details framed image

Atex Approved Bund Water Control Unit

HOW DOES IT WORK?

The probe sensors detect the difference between oil and water and safely pump only water* out of the bund into the surface water drainage system. At all times failsafe features will warn you of any risk of a potential pollution incident. The control panel turns the submersible pump on and off at the appropriate levels and warns of high water and excess oil levels in the sump, and power failure. The alarms can also be linked to a site telemetry system.

* rainwater containing less than 5mg of oil per litre of water (5 parts per million)

BUND CONTROL UNIT

The standard system is supplied complete with a control unit and a combined pump/probe assembly. The control unit is capable of monitoring the probe unit to automatically empty the bund of water when the water level rises to the start probe, leaving any pollutant behind. The status is displayed via a liquid crystal display but due to this being inside the enclosure, it is advisable to utilise a local beacon/sounder and/or connect the output relays to a BMS system.

FEATURES

  • Safe use in hazardous zones 1 and 2
  • Submersible pump with stand and conductivity probe unit (supplied assembled as shown)
  • High liquid level float switch (delay time configurable)
  • Failsafe probe to prevent pollutant being pumped if stop probe fails
  • Beacon output
  • Displays the number of pump operations for servicing purposes (retained even if power fails)
  • Five volt-free contact relay outputs for signalling of status to external equipment

SPECIFICATIONS

  • ATEX approved cast iron enclosure (BASEEFA07ATEX0201U)
  • ATEX approved submersible pump
  • Power: 230V ±10% 50Hz
  • Display: 16 x 2 character LCD
  • Alarm: Beacon (available on request)
  • Alarm output: 100mA fused mains output. NO and NC contacts available. Relay normally energised
  • Pump/probe unit cable length: 5 metres
  • 32mm discharge hose: 5 metres
  • Anti syphon device
  • High liquid level probe delay time configurable from 0 to 60 minutes

For further information on our Atex Approved Bund Water Control unit and to request a price please complete and submit the form below:

form float

Request A Quote

top image
Code Name Quantity Qty Required
0000/DT/Atec Atex Approved Bundtector 1

Please fill in the rest of your details below

Contact Details