You are here: Home / Case Studies
In case of an emergency please call us on our 24 hours emergency response number
Please see below case studies on products on services provided by Darcy Spillcare Manufacture to companies to assist with their environmental compliance.
Darcy solves the problem faced by a multi-sited fuel distribution in the removal of rainwater from the bund areas surrounding tank farms with the introduction of its Atex Approved Bund Water Control Unit. Our bund water control unit maintains 110% of the tanks capacity preventing the risk of a spill spread, reduced waste management costs and provided the company with peace of mind that its remote depots are even safer and meet environmental regulations.
Read MoreDarcy were approached to investigate the monitoring of washdown areas to reduce the risk of a pollution incident. Our mains powered GSM washdown tank alarms solved this problem.
Read MoreA large supplier of generators and services had a spill on one of their customers sites as a result of a generator failure. Darcy identified the requirement for the supply of two solar powered draintectors to prevent future spills and firewater frun off from the site.
Read MoreA gas powered power station realises the benefit of a free site survey undertaken by Darcy to identify areas at risk. A subsequent spill incident was swiftly handled utilising the spill kits sited in the areas identified to be at most risk preventing pollutants entering the storm drain thus reducing clean up and waste management costs.
Read MoreAn aviation company required a 24 hour security system for drains at the airport for the prevention and containment of pollutants and fire water runoff entering the surround ground water. The draintector from Darcy fits the bill providing the necessary site security systems to contain any liquid run off from the runways and other key areas.
Read MoreOur customer required a flexible approach to ordering. Limited by space they found they were having to place regular orders to maintain stock of absorbents to tackle oil spills. We introduced them to "call off ordering" giving them a committed price for a longer period of time and a quicker and more efficient ordering system.
Read MoreOur client has an internal storage area for storing oils and other contaminants. Upon inspection it was identified that oil was leaking through the concrete. To meet storage requirements, lining was applied to a certain height to the wall of the storage area.
Read MoreA leading UK airport needed to ensure bulk fuel storage bunded area was suitable to the capacity of tanks and could be installated with minimal disruption to the client and their operations. Darcy solved this with their envirobund system.
Read MoreLeading manufacturer of food in the UK required investigation into their production area bunding as oil was leaking through the concrete. Upon investigation only the main walls required relining.
Read MoreThe oil distributor delivered by means of a canal barge system and needed a way of protecting the watercourse when filling/delivering. The installation of a boom system would capture any oil that escapes.
Read MoreA power station required a debris boom to be installed within its on-site lagoon to prevent Xenospheres on the surface getting off the lagoon and into the local river. Darcy installed a debris and containment boom to meet the clients requirements.
Read MoreDarcy were commissioned to supply and install a debris boom on the Calder navigation river to prevent debris getting into the water intakes.
Read MoreDarcy were requested to attend site after a small fuel spill caused staining on the ground area on-site to remediate and clean the contaminated area.
Read MoreAviation Depot required automatically activated onsite liquid retention device to prevent risk of pollution to local area.
Read More24 hour emergency response service assists food manufacturer where an oil spill had taken place.
Read MoreOur client was made aware that his interceptors required oil alarms in accrdance with PPG3 and called on Darcy to supply, install and commission these.
Read MoreOur client, a major spill response company, required bespoke containment and absorbent products due to a 300 litre cooking oil spill into a private lake
Read MoreOur client, a large transport and distribution centre, needed a cost effective, manually deployable product to stop major spills leaving site
Read MoreDarcy's client had an issue with its employees using emergency spill kits for everyday cleaning rather than for emergency situations
Read MoreOne of the UK's top airports requested a demonstration of biocat to deal with the issues of aircraft on the stands leaking fuel during refuelling operations
Read More© Darcy Spillcare Manufacture 2012 All Rights Reserved all 3rd party trademarks acknowledged.
Darcy Products Ltd. Reg. Office: Darcy Spillcare Manufacture, Brook House, Larkfield Trading Estate, New Hythe Lane, Larkfield
Kent ME20 6GN. Reg. 472058. VAT 203 3006 36
