Explore the Darcy Group

Products

0800 0370 899

Rest of the World: +44 (0) 1732 762338

Header call to action 24-hour spill response
en English
af Afrikaanssq Albanianam Amharicar Arabichy Armenianaz Azerbaijanieu Basquebe Belarusianbn Bengalibs Bosnianbg Bulgarianca Catalanceb Cebuanony Chichewazh-CN Chinese (Simplified)co Corsicanhr Croatiancs Czechda Danishnl Dutchen Englisheo Esperantoet Estoniantl Filipinofi Finnishfr Frenchfy Frisiangl Galicianka Georgiande Germanel Greekgu Gujaratiht Haitian Creoleha Hausahaw Hawaiianiw Hebrewhi Hindihmn Hmongis Icelandicig Igboid Indonesianga Irishit Italianja Japanesejw Javanesekn Kannadakk Kazakhkm Khmerko Koreanku Kurdish (Kurmanji)ky Kyrgyzlo Laopt Portugueseru Russianes Spanish
ico Marine Systems
ico Aircraft Systems
ico Application Devices

CLEARSPRAY 100

CS100D side view

The CLEARSPRAY 100 is designed for operating from small to medium inshore and offshore vessels and produces a maximum output of 100 litres per minute.

CLEARSPRAY 100 has an installed, electric dispersant pump unit which is designed for operation from Tugs, Offshore Supply Vessels, Workboats and other specialised vessels using a variety of application equipment including Spray Arms or AFEDO™ Even Drop-out Nozzles.

The system is designed for the application of either concentrated (neat) or diluted dispersant and is available with an extensive range of options as described below. These options allow the system to be configured to meet specific customer and operational requirements at the most cost effective prices.

The CLEARSPRAY 100 D2F model has ABS product design approval.

Enquire Now

Features

Installed IP55 Electric Pump Unit

Neat and dilute dispersant application

Powder coated mild steel base plate and gunmetal and stainless steel pipework

Compatible with Spray Arms, Retractable Spray Arms and AFEDO™ Nozzles

Benefits

Reliable and robust pump unit Corrosion resistant

Adjustable application rates

Neat or dilute spraying up to 30% of total outlet flow

Precise application of dispersant with calibrated flow meters

Available Options

Dilute Spraying Option

Dispersant can be applied in concentrated form ie straight from the drum or diluted in sea water. This option uses an Ayles Fernie designed proportioning eductor to mix dispersant at up to 30% concentration in sea water.

Dilute Flow Meter

If the Dilute Option is selected, a Dilute Flow Meter is recommended to indicate the flow of dispersant and to setup the required application rate.

Outlet Flow Meter

In order to set the appropriate flow rate to the application devices ie spray arms or AFEDO™ nozzles, it is recommended that an Outlet Flow Meter is fitted to indicate the outlet flow.

Aluminium Spray Arms

The CS100 pump unit can be operated with 6m or 8m Spray Arms

Nozzle Downpipes

If Spray Arms are used with the CS100 pump unit, it is likely that Nozzle Downpipes will be required to position the nozzles at the correct height above the water surface.

WingJet Nozzles

The Spray Arm “swath width” can be extended by the use of WingJet Nozzles which are fitted at the outboard nozzle position.

AFEDO™ Nozzles

The AFEDO™ Nozzle is a specially designed nozzle which creates an even drop-out spray pattern and provides an effective alternative to spray arms. See the Application Systems and Equipment page on this website for a full description of the AFEDO™ Nozzle.

Recommended Spares

A comprehensive range of spares is available for the pump unit, hand lances, spray arms and the AFEDO™ Nozzle.

Pump Spares

A pump overhaul kit can be supplied which includes all necessary components for repairing a damaged or worn pump.

Protective Clothing

We recommend that system operators (particularly when using AFEDO™ nozzles) wear the appropriate protective clothing. This option includes; coveralls, goggles, gloves and respirator.

Oil Dispersant

Ayles Fernie will be pleased to recommend a suitable dispersant.

Technical Specification

  • Motive Unit: IP55, 3-Phase Motor for 50 Hz or 60Hz power supply.
  • Pump: Roller Type Positive Displacement Pump with 100 LPM Output
  • Pipework: Stainless Steel
  • Eductor: Proportioning type (0-20%)
  • Frame: Painted Mild Steel
  • Valves (Manual):
    1 No. Eductor Shut Off Valve
    1 No. Dispersant Control Valve
    1 No. Recirc Flow Control Valve
  • Pressure Relief Valve: 0 to 10Bar
  • Pressure Gauge: Dual Scale

Enquire about this product

Latest news

How to drive your business forward towards net zero & bypass overwhelm
November 15, 2023
Darcy Spillcare Logo

How to drive your business forward towards net zero & bypass overwhelm

The government has committed the UK to achieving ‘net zero’ emissions by 2050. But what is the meaning of net zero? It’s the legally binding commitment that as a nation we will not be putting any...

8 min read Read
From catastrophe to conservation: Examining the improvements in oil spill reduction since the 1970s
June 29, 2023
Darcy Spillcare Logo

From catastrophe to conservation: Examining the improvements in oil spill reduction since the 1970s

In 2022, three large oil spills, each one releasing over 700 metric tonnes of oil, and four medium spills (7-700 tonnes) were recorded. You think that’s bad? In the 1970s there were often over twenty...

6 min read Read
Introducing Responder - Our New Spill Training Venture
March 09, 2023
Darcy Spillcare Logo

Introducing Responder - Our New Spill Training Venture

Together with Compass Environmental, Darcy Spillcare are proud to announce the launch of a new spill training venture - Responder.

2 min read Read

© Darcy Darcy Spillcare Manufacture 2015 All Rights Reserved all 3rd party trademarks acknowledged.

Darcy Products Limited trading as Darcy Spillcare Manufacture, a company registered in England number 0472058.

The registered office of the company is, Brook House, Larkfield Trading Estate, New Hythe Lane, Larkfield, Kent ME20 6GN.